iSimple Automobile Accessories ISGM533 User Manual

Add Auxiliary Audio to  
Your Factory Radio  
Owner’s  
Manual  
PXAUX  
iSimple®  
A Division of AAMP of America™  
13190 56th Court Clearwater, FL 33760  
Ph. 866-788-4237  
©2013 AAMP of Florida, Inc.  
Rev. 01-23-13  
INST020  
 
PXAUX & Optional Add-ons  
Factory Radio  
(not included)  
Vehicle Specific Harness  
(actual harness may vary)  
PXAUX Interface  
RCA Input  
RCA Input  
OR  
OR  
3.5mm Input  
3.5mm Input  
Your Audio Devices  
MP3 Player  
(not included)  
DVD Player  
(not included)  
 
Introduction  
Thank you for purchasing the iSimple® PXAUX. The PXAUX is designed to  
provide endless hours of listening pleasure from your factory radio. To ensure  
that your auxiliary audio input performs correctly with your radio, we recommend  
that you read this entire manual before attempting installation of the PXAUX.  
This interface allows connectivity for two auxiliary audio inputs.  
Compatibility Notes  
application information and to verify your vehicle’s compatibility.  
Dipswitch Settings  
(ISTY531 & ISHD531 ONLY)  
Application  
Dipswitch 1 Dipswitch 2 Dipswitch 3 Dipswitch 4  
All Vehicles with XM button  
All vehicles without XM button  
Off  
Off  
Off  
Off  
Off  
On  
Off  
Off  
Honda  
2010+ Vehicles equipped with navigation  
On  
Off  
Off  
Off  
Lexus  
Scion  
All Vehicles with AMSAT button  
All Vehicles without AMSAT button  
All Vehicles  
Off  
Off  
Off  
On  
Off  
Off  
Off  
Off  
Off  
On  
Off  
Off  
Off  
Off  
Off  
Off  
20102011 Camry with AMSAT button  
2012+ vehicles equipped with nonnavigation touchscreen radio  
Vehicles equipped with navigation  
On  
On  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
On  
Off  
Off  
Off  
Off  
Toyota  
All Other Vehicles with AMSat button  
All other Vehicles Wwithout AMSat button  
4
 
Installation  
1. When making electrical connections it is always recommended that  
the vehicle’sbattery be disconnected from the electrical system before  
performing the installation.  
Please Note: If the radio is equipped with a built in CD  
Changer, please remove ALL discs before proceeding to  
prevent damage to the radio’s CD mechanism.  
2. Carefully remove the trim panels covering the bolts that secure the  
radio into the dash cavity. Remove these bolts, and carefully pull the radio  
from the dashof the vehicle. This will provide access to the factory radio  
connectors where youwill connect the vehicle specific harness.  
3. Disconnect the factory harness (if present) from the back of the radio. If  
you are installing the PXAUX into a Toyota or Honda with an external CD  
Changer and you are using CD Changer emulation mode, the CD  
Changer will have to be disconnected at the changer location for proper  
operation.  
4. Connect the 8-Pin auxiliary input cables to the ports on the PXAUX  
5. Plug in the male connectors on the vehicle specific harness into the port  
on the back of the radio. Next, connect the factory harness (if present)  
into the female connector on the vehicle specific harness. Be sure to  
make a firm connection but do not force it. Plug the Black micro-fit 24-pin  
connector on the vehicle specific harness into the PXAUX.  
6. To complete the installation secure the PXAUX into the cavity in the dash  
behind the radio. Be sure that the cables and interface modules are not  
near moving parts or sharp metal edges as they may damage the cables.  
To prevent rattling noises inside the dash, use zip ties, tape, or other  
fasteners to mount the interfaces securely.  
7. With all connections made, reconnect the vehicle’s battery, insert the key  
into the ignition, and turn the vehicle on. Check for proper operation of the  
PXAUX before reinstalling the factory dash panels.  
8. Note: The first time you access the PXAUX, your radio may display “DEV  
INIT” while the device is initializing. If this is displayed, please wait one  
minute then cycle the ignition off and on. Then access PXAUX mode  
again to begin normal operation.  
5
 
Ford/Lincoln/Mercury ISFD531 Operation  
Selecting AUX:  
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until  
“AUX1” is displayed on the screen. When you press the “AUX” button, you  
will see the corresponding “SAT” modes, a slight delay, and then the current  
mode will be displayed.  
Selecting between AUX1 / AUX2  
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until  
“AUX1” or “AUX2” is displayed on the screen.  
General Motors ISGM531 Operation  
Non Navigation  
Selecting AUX  
Press the “BAND” button a few times until “XM” is displayed on the screen.  
Immediately turn the rotary knob in the top right hand corner to scroll through  
available sources. Once “AUX1” is displayed, press the “FWD>>” button to  
select it. If you are currently in “SAT” mode you will need to press the “►I  
SEEK” button instead of “FWD>>” to select “AUX1” mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press the “FWD>>” button to select it.  
Navigation radio operation  
Selecting AUX  
Press the “FM” button then press the “XM” button. Immediately turn the rotary  
tune knob in the top right hand corner to scroll through available sources.  
Once “AUX1” is displayed, press the “►” button on the screen to select it. If you  
are currently in “SAT” mode, press the “SEEK ►I” button instead of the “►” button  
to select “AUX” mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode, turn the rotary knob to  
cycle through the available sources. Once “AUX1” or “AUX2” is displayed  
on the screen, press the “►” button to select it..  
6
 
General Motors ISGM532/ISGM533 Operation  
Selecting AUX  
Press the “BAND” button a few times until XM is displayed on the screen.  
Immediately turn the rotary knob to scroll through available sources. Once  
“AUX1” is displayed press PRESET 2 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX 2” is displayed on the  
screen press PRESET 2 to select it.  
General Motors ISGM534 Operation  
Selecting AUX  
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob  
clockwise until “AUX1” is displayed. Press the “>>>>>” button to select it. (It may be  
necessary to press the “CAT” button in order to make the “>>>>>” button visible.)  
Selecting between AUX1 / AUX2  
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob  
clockwise until “AUX2” is displayed. Press the “>>>>>” button to select it. (It may  
be necessary to press the “CAT” button in order to make the “>>>>>” button  
General Motors ISGM535 Operation  
Non Navigation  
Selecting AUX  
Press the “BAND” button until “XM” is displayed on the screen. Immediately  
turn the rotary knob to scroll through available sources. Once “AUX1” is  
displayed, press PRESET 6 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press PRESET 6 to select it..  
7
 
Honda/Acura ISHD531 Operation  
Satellite Radio Mode  
Selecting AUX  
Press the “XM” button to switch to SAT. Immediately turn the rotary knob  
or press TUNE UP to scroll through available sources. Once “AUX1” is  
displayed, press PRESET 6 to select it.  
Selecting between AUX1 / AUX2  
Press the “XM” button to switch to SAT. Immediately turn the rotary knob  
or press TUNE UP to scroll through available sources. Once “AUX2” is  
displayed, press PRESET 6 to select it.  
CD Changer Mode  
Selecting AUX  
Press the “DISC” or “AUX” button to switch to CD Changer mode. You are  
now in the AUX1 mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode press the “DISC ▲” button to  
cycle between AUX1” & “AUX 2” .Disc up and down are Preset 5 & Preset 6  
Hyundai ISHY531/ISHY532 Operation  
Selecting AUX  
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or  
“AUX2” is displayed.  
Selecting between AUX1 / AUX2  
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or  
“AUX2” is displayed.  
Mazda ISMZ531 Operation  
Selecting AUX  
Press the “SAT” button to enter satellite radio mode. Press the “CATEGORY  
UP” or “CATEGORY DOWN” button to scroll through the available sources  
until “AUX 1” or “AUX 2” is displayed. If satellite radio is present, the PXAUX  
sources will show up AFTER the last satellite radio category.  
Selecting between AUX1 / AUX2  
Press the “CATEGORY UP” or “CATEGORY DOWN” button to scroll through  
the available sources until “AUX 1” or “AUX 2” is displayed.  
8
 
Nissan ISNI531/ISNI532 Operation  
Selecting AUX  
Radios equipped with a “SAT” button  
Press the “FM” button and then the “SAT” button. Immediately press the  
“SEEK>>” button to scroll through the available sources. Once “AUX1” is  
displayed, press the “<<TUNE” button to select it.  
Radios equipped with a “RADIO” or “AM/FM/SAT” button  
PresstheRADIOorAM/FM/SATbuttonafewtimesuntilSATisdisplayed.  
Immediately press the “SEEK ▲” button to scroll through the available  
sources. Once “AUX1” is displayed, press the “TUNE ▼” button to select it.  
Selecting between AUX1 / AUX2  
For radios that have a “SAT” button  
Press the “FM” button and then the “SAT” button. Immediately press the  
“SEEK >>” button to scroll through the available sources. Once “AUX2” is  
displayed, press the “<<TUNE” button to select it.  
For radios equipped with a “RADIO” or “AM/FM/SAT” button  
Press the “Radio” or “AM/FM/SAT” button a few times until “SAT” is displayed.  
Immediately press the “SEEK▲” button to scroll through the available  
sources. Once “AUX2” is displayed, press the “TUNE ▼” button to select it.  
Toyota/Scion/Lexus ISTY531 Operation  
Satellite Radio Mode  
Selecting AUX  
Press the “AM/SAT” button to switch to AM then again to switch back to SAT.  
Immediately turn the rotary knob to scroll through available sources. Once  
“AUX1” is displayed, press PRESET 6 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press PRESET 6 to select it.  
9
 
CD Changer Mode  
Selecting AUX  
Press the “DISC” or “AUX” button to switch to CD Changer mode. You are  
now in the AUX1 mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode press the “DISC ▲” button to  
cycle between AUX1” & “AUX 2” .  
Volkswagen ISVW532 Operation  
Selecting AUX  
Press the “CD” button twice to switch the radio to the CD Changer source.  
This will access “AUX1”.  
Selecting between AUX1 / AUX2  
To select “AUX2” press preset #2. To select “AUX1” press preset #1.  
Troubleshooting  
Symptom  
Cause  
Remedy  
Radio shows  
“DEV INIT”  
PXAUX device is  
initializing.  
This only occurs the first time the  
PXAUX is powered on. Wait a few  
minutes, cycle ignition off and on then  
enter SAT mode.  
Radio does  
not recognize  
module.  
Dipswitches are  
not set properly  
or the unit did not  
initialize properly.  
See connection diagram for proper  
dipswitch setting. If the dipswitches  
are set properly disconnect the 24 pin  
micro-fit connector from the PXAUX for  
5 minutes to reset the interface.  
No sound.  
Auxiliary cable  
is not connected  
to accessory or  
PXAUX.  
Verify that the auxiliary cable is  
connected to the PXAUX and the  
accessory.  
10  
 
Notes  
11  
 
Warranty Information  
One Year Limited Warranty  
The quality controls used in the manufacture of this product will ensure your satisfaction.  
This warranty applies only to the original purchaser of this product from an authorized  
iSimple® dealer. This warranty covers any supplied or manufactured parts of this prod-  
uct that, upon inspection by iSimple® authorized personnel, is found to have failed in  
normal use due to defects in material or workmanship. This warranty does not apply to  
installation expenses. Attempting to service or modify this unit, operating this unit under  
conditions other than the recommended voltage will render this WARRANTY VOID.  
Unless otherwise prescribed by law, iSimple® shall not be liable for any personal injury,  
property damage and or any incidental or consequential damages of any kind (includ-  
ing water damage) resulting from malfunctions, defects, misuse, improper installation or  
alteration of this product. All parts of this iSimple® product are guaranteed for a period  
of 1 year as follows:  
Within the first 12 months from date of purchase, subject to the conditions above,  
iSimple® will repair or replace the product at their discretion, if it is defective in material  
or workmanship providing it is returned to an Authorized iSimple® dealer, with PROOF  
OF PURCHASE from an authorized iSimple® dealer.  
Warning:  
This equipment may be reset by unintentional electrostatic discharge during operation.  
Exposure to direct sunlight or extreme heat may cause damage or malfunction.  
For Best Performanc e Have It  
Professionally Installe d.  
12  
 

Ingersoll Rand Cordless Sander 77A Series User Manual
JBL Home Theater System 201 User Manual
Jensen Flat Panel Television je3211 User Manual
JL Audio Car Speaker SB D CLGR 12W3V3 User Manual
JVC CD Player XL SV23GD User Manual
Jwin MP3 Player JX MP101 User Manual
Kenmore Oven 790 4788 User Manual
Kensington Video Game Keyboard 64333 User Manual
KitchenAid Blender KSB580CR0 User Manual
Kobe Range Hoods Ventilation Hood CX1830GS 8 User Manual