iSimple Stove PGHFD1 User Manual

Add Auxiliary Audio to  
Your Factory Radio  
Owner’s  
Manual  
PXAUX  
For use with:  
PGHFD1  
PGHGM1  
PGHGM2  
PGHGM3  
PGHGM4  
PGHGM5  
PGHHD1  
PGHHY1  
PGHHY2  
PGHMZ1  
PGHNI1  
PGHNI2  
PGHTY1  
PGHVW2  
iSimple®  
A Division of AAMP of America™  
13190 56th Court Clearwater, FL 33760  
Ph. 866-788-4237  
©2009 AAMP of Florida, Inc.  
Rev. 04-25-11  
INST020  
 
PXAUX & Optional Add-ons  
Factory Radio  
(not included)  
Vehicle Specific Harness  
(actual harness may vary)  
PXAUX Interface  
RCA Input  
RCA Input  
OR  
OR  
3.5mm Input  
3.5mm Input  
Your Audio Devices  
MP3 Player  
(not included)  
DVD Player  
(not included)  
 
Introduction  
Thank you for purchasing the iSimple® PXAUX. The PXAUX is designed to  
provide endless hours of listening pleasure from your factory radio. To ensure  
thatyourauxiliaryaudioinputperformscorrectlywithyourradio, werecommend  
that you read this entire manual before attempting installation of the PXAUX.  
This interface allows connectivity for auxiliary audio input.  
ThismanualisasupplementalguidetoexplaintheoperationofthePXAUX. For  
other information such as Precautions and Installation, please refer to the full  
PXAMG owner’s manual that is included with your vehicle specific harness.  
Compatibility  
compatibility information to determine the proper vehicle specific harness  
for your application.  
Ford/Lincoln/Mercury PGHFD1 Operation  
Selecting AUX:  
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until  
“AUX1” is displayed on the screen. When you press the “AUX” button, you  
will see the corresponding “SAT” modes, a slight delay, and then the current  
mode will be displayed.  
Selecting between AUX1 / AUX2  
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until  
“AUX1” or “AUX2” is displayed on the screen.  
General Motors PGHGM1 Operation  
Non Navigation  
Selecting AUX  
Press the “BAND” button a few times until “XM” is displayed on the screen.  
Immediately turn the rotary knob in the top right hand corner to scroll through  
available sources. Once “AUX1” is displayed, press the “FWD>>” button to  
select it. If you are currently in “SAT” mode you will need to press the “►I  
SEEK” button instead of “FWD>>” to select “AUX1” mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press the “FWD>>” button to select it.  
Navigation radio operation  
Selecting AUX  
Press the “FM” button then press the “XM” button. Immediately turn the rotary  
tune knob in the top right hand corner to scroll through available sources.  
4
 
Once “AUX1” is displayed, press the “►” button on the screen to select it. If you  
are currently in “SAT” mode, press the “SEEK ►I” button instead of the “►” button  
to select “AUX” mode.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode, turn the rotary knob to  
cycle through the available sources. Once “AUX1” or “AUX2” is displayed  
on the screen, press the “►” button to select it..  
General Motors PGHGM2/PGHGM3 Operation  
Selecting AUX  
Press the “BAND” button a few times until XM is displayed on the screen.  
Immediately turn the rotary knob to scroll through available sources. Once  
“AUX1” is displayed press PRESET 2 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX 2” is displayed on the  
screen press PRESET 2 to select it.  
General Motors PGHGM4 Operation  
Selecting AUX  
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob  
clockwise until “AUX1” is displayed. Press the “>>>>>” button to select it. (It may be  
necessary to press the “CAT” button in order to make the “>>>>>” button visible.)  
Selecting between AUX1 / AUX2  
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob  
clockwise until “AUX2” is displayed. Press the “>>>>>” button to select it. (It may  
be necessary to press the “CAT” button in order to make the “>>>>>” button  
General Motors PGHGM5 Operation  
Non Navigation  
Selecting AUX  
Press the “BAND” button until “XM” is displayed on the screen. Immediately  
turn the rotary knob to scroll through available sources. Once “AUX1” is  
displayed, press PRESET 2 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press PRESET 2 to select it..  
5
 
Honda/Acura PGHHD1 Operation  
Selecting AUX  
Press the “FM” button and then the “XM” button. Immediately turn the rotary  
knob to scroll through the available sources. Once “AUX1” is displayed, press  
PRESET 6 to select it.  
Selecting between AUX1 / AUX2  
Press the “FM” button and then the “XM” button. Immediately turn the rotary  
knob to scroll through the available sources. Once “AUX1” or “AUX2” is  
displayed, press PRESET 6 to select it.  
Hyundai PGHHY1/PGHHY2 Operation  
Selecting AUX  
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or  
“AUX2” is displayed.  
Selecting between AUX1 / AUX2  
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or  
“AUX2” is displayed.  
Mazda PGHMZ1 Operation  
Selecting AUX  
Press the “SAT” button to enter satellite radio mode. Press the “CATEGORY  
UP” or “CATEGORY DOWN” button to scroll through the available sources  
until “AUX 1” or “AUX 2” is displayed. If satellite radio is present, the PXAUX  
sources will show up AFTER the last satellite radio category.  
Selecting between AUX1 / AUX2  
Press the “CATEGORY UP” or “CATEGORY DOWN” button to scroll through  
the available sources until “AUX 1” or “AUX 2” is displayed.  
Nissan PGHNI1/PGHNI2 Operation  
Selecting AUX  
Radios equipped with a “SAT” button  
Press the “FM” button and then the “SAT” button. Immediately press the  
“SEEK>>” button to scroll through the available sources. Once “AUX1” is  
displayed, press the “<<TUNE” button to select it.  
Radios equipped with a “RADIO” or “AM/FM/SAT” button  
PresstheRADIOorAM/FM/SATbuttonafewtimesuntilSATisdisplayed.  
Immediately press the “SEEK ▲” button to scroll through the available  
sources. Once “AUX1” is displayed, press the “TUNE ▼” button to select it.  
6
 
Selecting between AUX1 / AUX2  
For radios that have a “SAT” button  
Press the “FM” button and then the “SAT” button. Immediately press the  
“SEEK >>” button to scroll through the available sources. Once “AUX2” is  
displayed, press the “<<TUNE” button to select it.  
For radios equipped with a “RADIO” or “AM/FM/SAT” button  
Press the “Radio” or “AM/FM/SAT” button a few times until “SAT” is displayed.  
Immediately press the “SEEK▲” button to scroll through the available  
sources. Once “AUX2” is displayed, press the “TUNE ▼” button to select it.  
Toyota/Scion/Lexus PGHTY1 Operation  
Selecting AUX  
Press the “AM/SAT” button to switch to AM then again to switch back to SAT.  
Immediately turn the rotary knob to scroll through available sources. Once  
“AUX1” is displayed, press PRESET 3 to select it.  
Selecting between AUX1 / AUX2  
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle  
through the available sources. Once “AUX1” or “AUX2” is displayed on the  
screen press PRESET 3 to select it.  
Volkswagen PGHVW2 Operation  
Selecting AUX  
Press the “CD” button twice to switch the radio to the CD Changer source.  
This will access “AUX1”.  
Selecting between AUX1 / AUX2  
To select “AUX2” press preset #2. To select “AUX1” press preset #1.  
Troubleshooting  
Symptom  
Cause  
Remedy  
Radio shows  
“DEV INIT”  
PXAUX device is  
initializing.  
This only occurs the first time the  
PXAUX is powered on. Wait a few  
minutes, cycle ignition off and on then  
enter SAT mode.  
Radio does  
not recognize  
module.  
Dipswitches are  
not set properly  
or the unit did not  
initialize properly.  
See connection diagram for proper  
dipswitch setting. If the dipswitches  
are set properly disconnect the 24 pin  
micro-fit connector from the PXAUX for  
5 minutes to reset the interface.  
No sound.  
Auxiliary cable  
is not connected  
to accessory or  
PXAUX.  
Verify that the auxiliary cable is  
connected to the PXAUX and the  
accessory.  
7
 
Warranty Information  
One Year Limited Warranty  
The quality controls used in the manufacture of this product will ensure your satisfaction.  
This warranty applies only to the original purchaser of this product from an authorized  
iSimple® dealer. This warranty covers any supplied or manufactured parts of this prod-  
uct that, upon inspection by iSimple® authorized personnel, is found to have failed in  
normal use due to defects in material or workmanship. This warranty does not apply to  
installation expenses. Attempting to service or modify this unit, operating this unit under  
conditions other than the recommended voltage will render this WARRANTY VOID.  
Unless otherwise prescribed by law, iSimple® shall not be liable for any personal injury,  
property damage and or any incidental or consequential damages of any kind (includ-  
ing water damage) resulting from malfunctions, defects, misuse, improper installation or  
alteration of this product. All parts of this iSimple® product are guaranteed for a period  
of 1 year as follows:  
Within the first 12 months from date of purchase, subject to the conditions above,  
iSimple® will repair or replace the product at their discretion, if it is defective in material  
or workmanship providing it is returned to an Authorized iSimple® dealer, with PROOF  
OF PURCHASE from an authorized iSimple® dealer.  
Warning:  
This equipment may be reset by unintentional electrostatic discharge during operation.  
Exposure to direct sunlight or extreme heat may cause damage or malfunction.  
FCC Class B Radio Frequency  
Interference Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment gener-  
ates, uses, and can radiate radio frequency energy and, if not installed and used in ac-  
cordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit different from  
that of which the receiver is connected.  
4. Consult the dealer or an experienced radio / television technical  
for help.  
Notice : The changes or modifications not expressly approved by the party responsible for  
compliance could void the user authority to operate the equipment.  
For Best Performance Have It  
Professionally Installed.  
8
 

Indesit Cooktop KD6C35 User Manual
Invacare Mobility Aid Essential Series User Manual
Invacare Wheelchair 1061057 User Manual
Jet Tools Saw JTAS 10 User Manual
JVC Car Stereo System GET0067 001A User Manual
JVC Universal Remote CH X1000 User Manual
Kenwood Car Stereo System KAC 649S User Manual
Kenwood Electric Steamer FS560 User Manual
King Canada Drill KC 122FC User Manual
Konica Minolta Digital Camera 2430DL User Manual